Published at Thursday, 08 November 2018. End Table. By Katheryn Kaufman.
Do these like three inches apart than on this side, we're gonna do this door that he welded for me so that we can open. Okay, we got our holes drilled. I got a good blow my nose and then we'll put the rods in okay guys. This is it we're so excited. Definitely the hardest thing about doing. It is lining up your top holes with your bottom holes and making sure your space is equal and I could not have done it without my hubby. We fought and screamed and kissed and sang, and did all that, so it was good because that means if you do all that in the day you've lived a really good day. So this is rebar any you know. Hardware store carries that you can, just you know, have them cut it to measure, and then we just stuck some pillows in and I'm so excited about this project. It was so fun.
I had a few places that I had to get my husband Johnny to come in like hammer down and take off, but it was really really easy and now I'm just gonna clean up some of the dust and the pieces and then we're gonna start. Putting in our bars and they're gonna go across the front and here's the cool thing, we learned all right just in this lip that we have to go like an inch into the top part of where the bar goes. We're gonna drill in like an inch and I'll probably have my hubby help me. I can do it, but maybe the first couple I'll have him help me do once we get it up in there an inch then we're gonna do like a half an inch on the bottom so that it just kind of sits in and we're gonna.
Make a dull crepe out of this piece of furniture that holds our television, so it doesn't have to be a dog crate. It could be a cat house or you know, whatever sort of animal, and hopefully maybe one day we're gonna have a rescue sort of like a rescue farm out here and it's maybe just a healing crate for some animal has an injury. Obviously, it's not. For Monday, it's not big enough, but it's a great size must be open up the front of it. I just love doing things like this, where it has a purpose and you repurpose, you know, spend money and at the end of the project, you have a satisfaction that you did it, and I just love doing stuff like this. So join me in the next little bit and we will see how this turns out. I'm gonna do it a saw, and my hoodie has some metal bars that we measured for the front, we're taking me. That'S just bottom drawer out and these cabinets. I think it's gonna be awesome.
Any content, trademark’s, or other material that might be found on the nucleosanmarino.com website that is not nucleosanmarino.com’s property remains the copyright of its respective owner/s. In no way does nucleosanmarino.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 nucleosanmarino.com. All Rights Reserved.